Designed for more demanding applications due to the strong pull-in force the Accuride 3832HDTR drawer slides* feature a touch release to allow users to push the front of the drawer to open or close. They also have front disconnect, where a lever or push latch can be positioned near the front of the slides for easy operation of the disconnect function. These slides also have a hold-in feature to keep slides closed until you apply extra force.
*Also known as drawer runners
- Load rating up to 45kg (80,000 cycles)
- 100% extension
- 12.7mm slide thickness
- Cam drawer adjust (3.2mm)
Notes:
- The fixing recommendation is M4 screw
- Sold in pairs
- Drawer opens 50mm - 125mm when pushed in
- Use for side (vertical) mount only
- Drawer width should not exceed slide length
- Not for lateral file drawer applications or where the drawer is wider than it is deep
Hole not available for SBB447 - see technical drawing
Hole not available for SBB449, SBB451, SBB453 - see technical drawing
Material - Mild Steel
Finish - Zinc Plate and Passivate
SL = Slide Length
TR = Travel
W = Weight of slide (kg) - per pair
L = Load capacity of slide (kg) - per pair