This Metric Flat Round Pushnut is a very cost effective option. This fastener provides a good balance between maximum holding strength and reasonable push on force. Pushnuts can be applied with great speed, as pushing on (especially with an air hammer) is much faster than running down nuts. These fasteners are especially suitable for products shipped in knock-down form.
- Quick and easy to install
- Economical
- Good for products in knock-down form
- Shock resistant
- Distortion resistant
- Multiple sizes
Typical applications for these pushnuts include motor vehicles, domestic appliances, toys and golf trolleys.
F1 = Maximum Push-on Force in Newtons.
F2 = Minimum Holding Strength in Newtons.
Material - Austempered Carbon Steel
Stud diameter in the table below is given in inches.