You have no items in your shopping basket.
The Flexi-Lite Kit is a low cost innovative solution for floor mounting equipment such as air source heat pumps. It avoids the high cost and time-consuming method of constructing a concrete slab.
Our solution can be delivered to site with minimum ground work preparation. It can be assembled in minutes and provides an external fixing point with built-in anti-vibration characteristics to suit all sizes and brands of domestic air source heat pumps.
- Low cost sand rapid installation time
- Easy to transport and locate
- Safe working load of 600kg
- Simple steps to construct
Step 1. Position the light-weight slab in the required location of the unit and place the two feet on the slab to match the pitch of the unit Step 2. Measure 50mm from each end and drill a 9mm hole through the foot and through the lightweight slab Step 3. Insert all four base plates through the underside of the slab and reposition the slab into place.
Step 4. Secure both feet onto the threads with nuts andamp; washers, and position the spring nuts in the channel.
The Flex-Lite Kits in now complete and ready for your equipment to be fitted.
Please contact us today to order these innovative new kits.All dimensions in mm. All weights in kg.
L = Length
W = Width
H = Height
W1 = Weight
M = Maximum Load