You have no items in your shopping basket.
SwiftandSure Vari-Lift Gas Springs Camloc 10-23Range
The 10-23 range of Camloc Vari-Lift Gas Springs are recommended for panel weights of 40kg to 150kg. Spring force can be varied from 15kg to 120kg, with stroke lengths from 100mm to 300mm. Our Camloc Swift and Sure Variable Lift Gas Springs from Arvin Meritor are available in an extensive range of sizes and can use a wide range of End Connectors and Brackets.
The gas pressure in our Variable Lift Gas Springs/ Gas Struts can be adjusted down to meet specific requirements, and conveniently can also be adjusted whilst in position.
Using the standard tool provided, gas can be gradually released via the Vari-Lift valve to provide the force suited to your application. Once you have done this, we are able to measure this force and provide fixed force Gas Springs to your precise requirement if you need a continuing supply of gas springs in your application.
WARNING: The force can only be adjusted downwards. (See Vari-Lift Adjustment Instructions for details).
Note - Supplied fully charged at 1200N, can be gradually released down to 150N.
- No need to calculate force
- Adjustable to any force within the range
- Force can be adjusted after installation
- Simple adjustment using standard tool supplied
- Ideal for Prototyping and short production runs
- Ideal where application weights vary
For Eye Bolt Connectors use GSA006
For Ball Joint Connectors use GSA005
1 = 1 Gas Spring
Click on above image to magnify
Drawings and images are for reference only and should not be used for product specification. For new applications we recommend that you carry out assembly tests using samples supplied by us.